,Primary Aluminium,Secondary Aluminium,Bronze/Brass,Phosphorous Copper,Aluminium Bronze,
Accordion Menu Using jQuery


Coal, coke and solid biomass fuel ash and volatile test is mainly applied in the sectors of electricity, coal, metallurgy, petrochemical, environmental protection, cement, paper, geological exploration, scientific research institutions. GB/T212-2008 This product complies with GB/T212-2008 "method of analysis of coal"

Conformance with Standards

ISO1171 Solid mineral fuels – Determination of ash   ISO562 Hard coal and coke - Determination of volatile matter   ASTM D3174-04 Standard Test Method for Ash in the Analysis Sample of Coal and Coke   ASTM D3175-07 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke    GB/T212-2008 Standard Test Method for Proximate Analysis of Coal


  • Temperature range:  room temperature - 1000 ° C
  • Temperature control accuracy: ± 2.5 ℃
  • Temperature Resolution: 1 ° C
  • Maximum power: 3.5kW
  • Power Requirement: 220V(-15%-10%),50/60Hz
  • Furnace size: 298 * 203 * 121
  • Dimension (mm): 435*591*520


1.Humanistic Design & High Precision
* Choosing classic fast ash test, the operator only need to load sample onto the autoloader. Then sample will be sent to the furnace and be tested automatically. When test finishes , samples will be sent out of the furnace automatically The operator is free from heat radiation during the test.

* Sample sending is fully automatically controlled to avoid error from manual operation.

*Timing and Countdown are available for observation of time and temperature.

* Microprocessor controlled and large LCD screen.

2.Powerful & Stable Performance
* It support slow ash , fast ash I(classic fast ash),fast ash II ,Volatile matter, and general test methods. Constant thermostatic period, and heating rate can be set up at the general testing mode.

* With classic fast ash test mode , the operate can choose manual or automatic sample preparation with the spin button . Time of sample introduction can be modified based on user’s needs.

* The instrument has alarming and power-off protection function against thermocouple counter-connection, thermocouple disconnection and over-temperature & heating power open circuit . And it has hibernating function which extend service time of furnace.

* High quality heating and insulation material.,Primary Aluminium,Secondary Aluminium,Bronze/Brass,Phosphorous Copper,Aluminium Bronze,

© Copyright 2004 -2011 by Usetco Company Limited Designed by