Sundy Carbon Hydrogen & Nitrogen Analyzer can be used to determine the carbon, hydrogen and nitrogen content in coal, coke and other combustibles.
Conformance with Standards
ISO29541 Solid mineral fuels – Determination of total carbon, hydrogen and nitrogen content– Instrumental method ASTM D5373-02 Standard Test Method for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in
Laboratory Samples of Coal and Coke
GB/T476-2008 Standard Test method for Determination of Carbon and Hydrogen of Coal
Gas requirement:
Combustion-supporting gas : Oxygen Purity: ≥99.5%
Driving gas : Nitrogen Purity: ≥99.5%
Carrier gas：Helium Purity：≥99.99%
Power Requirement: 220 V(-15%-10%),50Hz
Gas Requirement: Oxygen (99.5% purity)
Max Power: 4.5kW
High Automation
With the 34 place autoloader, this machine delivers high level of automation freeing up the operator for other tasks of importance
Replace The Combustion Crucible Conveniently (Patent No:ZL200710303473.9)
No disassemble or cooling required, replace the combustion crucible conveniently.
Just click on the software, then the crucible can be replaced automatically.
Replace The Furnace Reagent Conveniently
With separate design of combustion furnace and reagent furnace, the reagent can easily and safely be replaced with the minimal amount of effort.
High level of Test Accuracy
Samples are carried into the combustion chamber by oxygen blow, which enables all the released gases to be captured and thus enables a higher level of test accuracy.
Low Cost Of Gases
Oxygen with purity of 99.5% can meet the test requirement.
During the test, He consumption is only 0.7L/min
Ultra-low drift infrared cell and thermal conductivity cell
With high-performance infrared light supply and superior optical glass as well as a gold infrared path and precise thermostatic control, the drift of the infrared cell and TC cell designed by Sundy has been optimized.
Heating Rate
Operational temperature is reached within 2.5 hours cutting start up time down to a minimum.
Intelligent Control
Easy-to-use Windows-based software
Easy data handling, real time data can be transmitted by internal network.
With CAN bus interface, several elemental analyzers can be controlled by a single PC without mutual influence.
It can be connected with balance and network by standard interface RS232.
